Cables; Battery Charging And Operating Power - Motorola MC67 User Manual

Battery LED Charging Indicators
Table 10-5
LED
Off
Slow Blinking Amber
Solid Amber
Fast Blinking Amber

Cables

This section describes how to set up and use the cables. The cables are available with a variety of connection
capabilities.
The following communication/charge cables are available:
•
USB Charging cable
• Provide the MC67 with operating and charging power when used with the Motorola approved power
supply.
• Synchronize information between the MC67 and a host computer. With customized or third party
software, it can also synchronize the MC67 with corporate databases.
•
Charge Only cable
• Provide the MC67 with operating and charging power when used with the Motorola approved power
supply.
•
Auto Charge cable.
• Provide the MC67 with operating and charging power when used with the Motorola approved power
supply.
•
DEX cable
• Provides communication with electronic data exchange devices, such as vending machines.

Battery Charging and Operating Power

The communication/charge cables can charge the MC67 battery and supply operating power.
To charge the MC67 battery:
Connect the communication/charge cable power input connector to the Motorola approved power source.
1.
Slide the bottom of the MC67 into the connector cup end of the communication/charge cable and gently
2.
press in until it latches into the MC67.
Slide the two locking tabs up until they both lock into position.
3.
No battery in slot; battery is not charging; battery is not inserted correctly in the charger;
charger is not powered.
Battery is charging.
Charging complete.
Charging error.
Accessories 10 - 15
Indication