Lubricate Control Box Cross Shafts; Lubricate Cruise Control Pivot; Lubricate Pump Control Bushings; Lubricate Steering Wheel Bronze Bushings - Gizmow Formula Operator's Manual

Table of Contents

Advertisement

5.1.14 Lubricate control box cross shafts (3)

Service Interval: 160 hrs.
a. Stop engine, wait for all moving parts to stop, and remove key.
b. Open RH and LH foot covers.
c. Lubricate the three stainless steel cross shafts rod with spray type lubricant or
light oil.

5.1.15 Lubricate cruise control pivot

Service Interval: 160 hrs.
a. Stop engine, wait for all moving parts to stop, and remove key.
b. Lubricate bronze bushings on cruise control pivot with a spray type lubricant
or light oil.

5.1.16 Lubricate pump control bushings

Service Interval: 160 hrs.
a. Stop engine, wait for all moving parts to stop, and remove key.
b. Unlock seat latch and tilt seat up. Hold in place with the prop rod.
c. Lubricate bronze bushings on the main centre pump pivot and the ones on the
outside of the pumps with a spray type lubricant or light oil.

5.1.17 Lubricate steering wheel bronze bushings

Service Interval: 160 hrs.
a. Stop engine, wait for all moving parts to stop, and remove key.
b. Remove side cover on the control box.
c. Lubricate bronze bushings on the steering wheel shafts with a spray type
lubricant or light oil.
5.1.18 Lubricate steering wheel chain
Service Interval: 160 hrs.
a. Stop engine, wait for all moving parts to stop, and remove key.
b. Remove side cover on the control box.
c. Lubricate the chain between the two steering wheel shafts with a spray type
lubricant or light oil.
5.1.19 Lubricate front steering chains
a. Service Interval: 160 hrs.
b. Stop engine, wait for all moving parts to stop, and remove key.
c. Open RH and LH foot covers.
d. Lubricate the chain between the two front steering wheel shafts with a spray
type lubricant or light oil.
5.1.20 Lubricate cam followers
Service Interval: 160 hrs.
a. Stop engine, wait for all moving parts to stop, and remove key.
b. Remove side cover on the control box.
c. Lubricate the bronze bushings on the two cam follower pivots with a spray
type lubricant or light oil.
5.1.21 Remove engine screen and clean cooling fins
Formula - 20071
Maintenance & Adjustment
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Formula f2761kh-eu

Table of Contents