Safety Signs - Gizmow Formula Operator's Manual

Table of Contents

Advertisement

Introduction
properly maintained and operated correctly.
1.1.9
Check all bolts frequently to maintain proper tightness.
1.1.10 Keep all guards, shields and all safety devices in place and in safe working
condition.
1.1.11 Frequently check for worn or deteriorating components that could create a
hazard.
1.1.12 All replacement parts must be the same as or equivalent to the parts supplied as
original equipment.
POTENTIAL HAZARD
Hydraulic fluid escaping under pressure can penetrate skin and cause injury.
WHAT CAN HAPPEN
Fluid accidentally injected into the skin must be surgically removed within a few hours
by a doctor familiar with this form of injury or gangrene may result.
HOW TO AVOID THE HAZARD
Make sure all hydraulic fluid hoses and lines are in good condition an all hydraulic
connections and fittings are tight before applying pressure to hydraulic system.
Keep body and hands away from pinhole leaks or nozzles that eject high pressure
hydraulic fluid.
Use cardboard or paper, not your hands, to find hydraulic leaks.
Safely relieve all pressure in the hydraulic system by placing the control pedals in
neutral and shutting off the engine before performing any work on the hydraulic
system.
1.2

SAFETY SIGNS

1.2.1
Keep all safety signs legible. Remove all grease, dirt, and debris from safety signs
and instructional labels.
1.2.2
Safety signs must be replaced if they are missing or illegible.
1.2.3
When new components are installed, be sure that current safety signs are affixed
to the replaced components.
1.2.4
New safety signs may be obtained from your authorised Gizmow Inc. equipment
dealer or distributor or from Gizmow Inc.
1.2.5
Safety signs may be affixed by peeling off the backing to expose the adhesive
surface. Apply only to a clean, dry surface. Smooth to remove any air bubbles.
1.2.6
Familiarize yourself with the following safety signs and instruction labels. They
are critical to the safe operation of your Gizmow commercial mower.
10
WARNING
WARNING
Formula - 20071

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Formula f2761kh-eu

Table of Contents