Fuel Shut-Off Valve; Drive Wheel Release Valves - Gizmow Formula Operator's Manual

Operation

4.1.14 Fuel Shut-Off Valve

Located on the right-hand side of the machine.
The fuel shut-off valve is used to shut off the
fuel when the machine will not be used for a
few days, during transport to and from the job
site, and when parked inside a building.
The valve has three positions, each position
made in 1/4 turn increments. Valve handle
pointed at engine is the OFF position. Rotate
valve handle 1/4 turn right (from Off position)
for fuel flow from the right tank. Rotate valve
handle 1/4 turn left (from Off position) for fuel
flow from the left tank.

4.1.15 Drive Wheel Release Valves

Located on the right front corner of the hydrostatic pumps. Drive wheel release valves
release the hydrostatic drive system to allow the machine to be pushed without the engine
running. Unlock seat latch and tilt the seat up to gain access to pumps. With a 7/16"
wrench, turn both valves one turn counter-clockwise to release drive system.
Turn clockwise to reset system. DO NOT over tighten. DO NOT tow machine.
4.2 SEAT
4.2.1 The seat can be adjusted forwards
and backwards by moving lever to the right
and the seat can then be moved.
To adjust the seat suspension rotate the knob
clockwise to make the suspension firmer. To
reduce the suspension rotate the knob counter
clockwise.
4.2.2 The seat arm rests can be raised and
lowered by rotating the knob. Rotate clockwise
to raise the arms and counter clockwise to
lower them.
22
Left Tank
OFF
Right Tank
Formula - 20071