Using Installer To Set Up Connection And Install Software - Fuji Xerox DocuPrint CM215 series User Manual

 Using Installer to Set Up Connection and Install Software
NOTE:
• The following procedure sets up printer connection and then install the drivers and software. If you have
already established printer connection, go to
driver and software immediately.
Launching the Printer Setup Screen
1
Insert the Software Pack CD-ROM into your computer to start the FX Printer Setup screen.
NOTE:
• For Windows 8 and Windows Server
the screen, and then select Run setup.exe.
• If the CD does not automatically launch, perform the following steps.
a
For Windows XP, Windows Server 2003, Windows Server 2008 and Windows Server 2008 R2, click Start (start for
→
Windows XP)
For Windows Vista
For Windows 8 and Windows Server 2012, right-click on the Start screen and click All apps
b
Enter "D:\setup.exe" (in case your optical disk drive is D), and then click OK.
2
Click the Setup Printer and Install Software button.
3
If you agree to the terms of the License Agreement, choose I accept the terms of the license
agreement, and then click Next.
"Using Installer to Install Software" on page 94
®
2012, click on the message displayed on the upper right corner of
Run.
®
and Windows 7, click Start
→ →
All Programs Accessories
Printer Connection and Software Installation
to install the print
→
Run.
→
Run.
91