Technical Specifications - X-Rite EasyTrax Setup And Operation

Technical Specifications

General
Press Console Sizes:
Scanning Area:
Scanning Speed:
Patch Size (min):
Color Bar:
Density Repeatability:
Spectral Repeatability:
Density Range:
Spectral Range:
Reflectance Range:
Density Accuracy:
Density Status:
Colors Supported:
Inter-instrument Agreement: 0.5 dE00 Average, 1.0 dE00 Max.
Illumination:
Polarization:
Paper Thickness:
Communication Port:
External Power Supply
Input Requirement:
Instrument Power Required:
Environmental
Operating Temp:
Storage Temp:
Usage:
Altitude:
Pollution Degree:
Transient Overvoltage:
Design and specifications subject to change without notice.
EasyTrax Setup and Operation
20" (51 cm), 26" (66 cm), 29" (74 cm), 32" (81 cm),
40" (102 cm)
Up to 40" (102 cm)
150 mm / sec. for 5 mm x 5 mm patches
3.8 mm x 4 mm
Comes with pre-defined color bars or use custom color bar with
the advanced Editors
Black density ± 0.02D @ 1.5D
White density ± 0.01D
0.20 dE00 on white tile
0 – 2.5D
400nm – 700nm
0 – 150% Reflectance
± 0.02D at 1.5D
E/T
Up to 8 colors
Gas pressure lamp
Polarized head reads polarized density and un-polarized color.
0.1 mm Min., 1.5 mm Max.
Ethernet
100-240VAC, 50/60Hz 0.8A LPS
24VDC @ 1.2 A
+10°C (50°F) to +40°C (104°F), 85% RH non-condensing
-40°C (-40°F) to +70°C (158°F)
Indoor Only
2000m
2
Category II
22