Cleaning The Rollers - X-Rite EasyTrax Setup And Operation

Cleaning the Rollers

It is recommended that you clean the rollers if they are noticeably dirty.
Release the read head from the locked down position by simultaneously compressing the
1.
"orange" release posts on both sides of the read head.
Rotate the read head back so that the rollers are accessible for cleaning.
2.
Note: The read head will not stay in place. Make sure you hold it in the upright position.
Wipe the rollers clean with a lint-free cloth dampened in water or mild cleaner.
3.
Lower the read head back to the measurement position and verify that the release posts
4.
snap back into position.
EasyTrax Setup and Operation
Release post
Release post
19
Rollers