X-Rite EasyTrax Setup And Operation page 13

Position a magnet on the left and right edges of the press sheet to hold it in place on the
5.
table.
Move the read head across the color bar without changing the up/down position (vertical
6.
position). Remove the paper holding magnets and slide the paper stop alignment tab on the
far end of the sheet left or right until the final patch lines up under the reticule.
Return the read head to home position and verify that the color bar is aligned with the
7.
reticule during the return trip.
EasyTrax Setup and Operation
Correct
Incorrect
11
Reticule properly
positioned over the final
patch on the sheet
Alignment tab
Reticule not properly
positioned over the final
patch on the sheet