Instrument Specifications; General; Environmental - X-Rite Set Up And Operation Manual

Instrument Specifications

General

Environmental

Measurement Geometry: ........ Reflection 45°/0° per ANSI PH2.17
Aperture Configurations .......... Small, Medium, and Medium w/polarization
Light Source: ........................ Gas pressure @ 2850°K
Spectral Sensor: .................... DRS Technology (31pt)
Spectral Range: .................... 400 – 700 nm
Reflectance Range: ................ 0 - 150% R
Density Range: ..................... 0 - 2.5D for Medium and Small Spot
Repeatability on White: .......... 0.2 ΔE max.; ±0.01D max.
Density Reproducibility: .......... Cyan, Magenta, and Visual Filters
Calibration: .......................... White calibration reference provided in track
Scan Spot Size
(total scanned spot)
Patch Width
(along scan path)
Patch Height: ....................... 3.2 mm min. for Medium Spot
Paper Thickness: ................... 0.030 in. (0.762 mm) max Medium and Polarized Spot
Scanning Rate: ..................... 2 in. (50 mm)/Second on a 3.0 mm Patch for Medium
Track Lengths: ...................... 40 in. (1016 mm) standard, 29 in. (736.6 mm),
Color Bar Location: ................ Entire color bar within 1.5 in. (38 mm) of edge
Color Bar Alignment: .............. Automatic centering of measurement on color bar
Color Bar Quantity: ................ 1 row per paper surface
Paper Hold Down: .................. Vacuum activated with measurement command
Power Required: .................... 100-240VAC, 50-60Hz
Operating Temp: ................... +10° (50°F) to +35°C (95°F)
Humidity Range: ................... 0 - 85% RH non-condensing
Storage Temp: ...................... -20°C to +50°C
Usage: ................................. Indoor Only
Design and specifications subject to change without notice.
I N T E L L I T R A X
0 – 3.0D for Polarized Spot
±0.02D @ 1.5D
Yellow Filter
±0.02D @ 1.5D for a non DP scanning head
±0.03D @ 1.5D for a DP scanning head
: . 2.3 mm x 2.75 mm min. for Medium Spot
1.2 mm x 2.75 mm min. for Small Spot
2.7 mm x 3.20 mm min. for Polarized Spot
: ........ 3.0 mm min. for Medium and Small Spot
3.5 mm min. for Polarized Spot
2.0 mm min. for Small Spot
3.5 mm min. for Polarized Spot
0.020 in. (0.508 mm) max Small Spot
and Small Spot
2.3 in. (58 mm)/Second on a 3.5 mm Patch for
Polarized Spot
32 in. (812.8 mm) 65 in. (1651 mm), and
80 in. (2032 mm)
Paper set against stops
®
A U T O S C A N N I N G S Y S T E M
21