Instrument Indicator Led; Read Head Reticule Positioning - X-Rite EasyTrax Setup And Operation

Instrument Indicator LED

The instrument Indicator LED conveys a variety of system conditions. Below is a description of
each color condition for the LED.
•
Solid Green — indicates that the read head is at the home position and ready for use
•
Solid Orange — indicates that the read head is away from the home position
•
Solid Red — indicates that the instrument hardware is not ready and a problem may
exist with the system
•
Flashing Green — indicates that the instrument is taking a reading, status OK
•
Flashing Orange — indicates that the instrument is performing a calibration
•
Flashing Red — indicates that the network is not ready

Read Head Reticule Positioning

The optics which is located under the read head requires the use of the reticule for proper setup
and spot measurement positioning. The reticule is located at the front of the read head.
To properly position the reticule for a color bar or spot measurement, look down through the
upper sights to the reticule. The reticule is properly positioned when the tips of the reticule and
tips of the upper sights are aligned with each other (horizontal plane) in the center of the patch
or spot, and the reticule is centered between both upper sights (vertical plane).
EasyTrax Setup and Operation
Read head
Tip of upper sight
Tip of reticule
Reticule centered on a patch of a color bar
9