X-Rite EasyTrax Setup And Operation page 16

•
Near side of the laser line is below the color bar
Turn the front adjustment screw in the clockwise direction to move the near side of the
laser line up onto the color bar.
•
Far end of the laser line is above the color bar
Turn the back adjustment screw in the clockwise direction to move the far end of the
laser line down onto the color bar.
•
Far end of the laser line is below the color bar
Turn the back adjustment screw in the counterclockwise direction to move the far end
of the laser line up onto the color bar.
EasyTrax Setup and Operation
14