Pin Assignments; Introduction; Summary; Jumper Settings - Emerson MVME51005E Installation And Use Manual

Pin Assignments

6

Introduction

This chapter provides information on pin assignments for various jumpers and connectors on
the MVME5100 Single Board Computer.

Summary

The following tables summarize all of the jumpers and connectors:
Jumper
J1
J2
J4
J6, J20
J7
J10, J17
J15
J16

Jumper Settings

The following table provides information about the jumper settings associated with th
MVME5100 Single Board Computer. The table below provides a brief description of each
jumper and the appropriate setting(s) for proper board operation.
Jumper
J1 RISCWatch Header
J2 PAL Programming Header
Description
RISCWatch Header
PAL Programming
Header
Ethernet Port 2
Configuration
Operation Mode
Jumpers
Flash Memory Selection
Ethernet Port Selection
System Controller (VME)
Soldered Flash
Protection
Description
MVME51005E Single Board Computer Installation and Use (6806800A38B)
Connector
J3
J8
J25
J11 - J14
J21 - J24
P1, P2
J9
J18
J19
J5
Setting
None (Factory Use Only)
None (Lab Use Only)
6
Description
IPMC761 Interface
Memory Expansion
PCI Expansion Interface
PMC Interface (Slot 1)
PMC Interface (Slot 2)
VMEbus Interface
Ethernet Interface
(LAN1)
Ethernet Interface
(LAN2)
COM1 Interface
COM2 Interface
Default
N/A
N/A
53