Diagnostics - Emerson MVME51005E Installation And Use Manual

3 PPCBug Firmware
Table 3-1. Debugger Commands (continued)
Command
PF
PFLASH
PS
RB
RD
REMOTE
RESET
RL
RM
RS
RUN
SD
SET
SROM
ST
SYM
SYMS
T
TA
TIME
TM
TT
VE
VER
WL
!
Caution

Diagnostics

The PPCBug hardware diagnostics are intended for testing and troubleshooting the
MVME5100.
34
MVME51005E Single Board Computer Installation and Use (6806800A38B)
Description
Port Format
Program FLASH Memory
Put RTC into Power Save Mode
ROMboot Enable
Register Display
Remote
Cold/Warm Reset
Read Loop
Register Modify
Register Set
MPU Execution/Status
Switch Directories
Set Time and Date
SROM Examine/Modify
Self Test
Symbol Table Attach
Symbol Table Display/Search
Trace
Terminal Attach
Display Time and Date
Transparent Mode
Trace to Temporary Breakpoint
Verify S-Records Against Memory
Revision/Version Display
Write Loop
Although a command (PFLASH) to allow the erasing and reprogramming of
Flash memory is available to you, keep in mind that reprogramming any portion
of Flash memory will erase everything currently contained in Flash, including
the PPCBug debugger, if the target address addresses the bank in which it
resides.