Maytag AER4111AA Series Service Manual page 28

Installation Instructions
^kqfJqfm absf`b fkpq^ii^qflk fkpqor`qflkp
pqbm P J o~‹„‚ f‹‘~‰‰~‘†Œ‹
A. A free-standing range may be installed by one person.
B. Align the range to its designated location and slide it
back into position. Note: A minimum clearance of 1/4²
(6 mm) is required between the range and the leveling
foot that will engage the ANTI-TIP bracket, see figure
4.
`^rqflkW Damage to the range may occur if range is
moved or lifted by grasping the main top or backguard.
C. All freestanding ranges with a glass top have a non
lift-up top. Coil tops are lift-up.
A – 4
D. For SAFETY CONSIDERATIONS as well as optimum
performance adjust the range so that it is level. This
may be checked by placing a spirit level or a large pan
of water on the cooktop or the oven rack. If an
adjustment is required pull the range forward, tip the
range and rotate the leveling feet as required.
E. To check the range for proper installation of the anti-tip
bracket: Use a flashlight and look underneath the
bottom of the range to see that one of the rear leveling
feet is engaged in the bracket slot.
F. Proceed with the remainder of the installation
instructions provided with the range.
klqbW USE A MINIMUM OF (2) SCREWS TO
INSTALL ANTI-TIP BRACKET TO THE
WALL OR FLOOR.
cfdrob Q
16026784 © 2005 Maytag Services