Door Disassembly (Standard And Large Windows) - Maytag AER4111AA Series Service Manual

Disassembly Procedures
!
Door Disassembly
(Standard and Large Windows)
1. Remove oven door, see "Oven Door Removal"
procedure.
2. Place door on a protected surface.
3. Remove screws securing bottom glass support to
oven door.
4. Slide inner door glass and trim towards the bottom of
oven door and remove (large window models only).
5. Detach right and left door trim pieces.
6. Remove screws securing top door trim to oven door
chassis.
7. Remove screws securing door handle brackets to
inner door panel.
Standard Window
Top
Door
Trim
Side
Door
Trim
Door
Handle
Door
Glass
Support
22
WARNING
Inner
Glass
Door
Baffle
Door
Gasket
Side
Door
Trim
Door
Handle
Glass
Support
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
8. Lift upward on the lower side of the door handle to
release side alignment screws and rotate towards the
top of the oven door to release and remove.
9. Remove screws securing door handle to door handle
brackets.
NOTE: Proceed with the following steps for inner door
disassembly.
10.Remove screws securing door glass retainer to door
baffle and remove.
11 Slide inner door glass downward to release from
upper door glass retainers and remove.
12.Remove screws securing door baffle to door lining
and remove.
13.Remove insulation from oven door.
14.Lift inner glass and glass frame from oven door.
15.Reverse procedures to reassemble oven door.
Door
Lining
Rubber Spacer
Glass
Retainer
Door
Insulation
Inner
Glass
Door
Baffle
Top
Door
Trim
Inner Door
Glass
Door
16026784
Large Window
Glass
Frame
Door
Insulation
Door
Gasket
Glass
Retainer
© 2005 Maytag Services
Door
Lining