Focus FS-T1001 User Manual page 25

When timecode stops, the recording stops.
NOTE: When this mode is being used, before connecting
FS-T1001 to the camera, make sure the camera is set to
REC-RUN mode and not recording.
Set Record Mode
Two
REC MODE
•
- In normal record mode, FS-T1001 begins
NORMAL
recording immediately when triggered.
•
RETRO CACHE
a constant video loop in the FS-T1001's flash RAM. The
length of the video loop can be preset in one-second
intervals, up to 10 seconds. Once record is triggered, the
cached content is added to the beginning of the recording.
See SETUP for presetting the desired retro cache duration.
Set Record Format Mode
Two
REC FORMAT
•
- Sets the record bit rate to 35Mb/s (MP@HL)
HQ MODE
recording mode in the XDCAM EX format.
•
- Sets the record bit rate to 25Mb/s (MP@H-14)
SP MODE
recording mode in the XDCAM EX format.
Set 1080i Frame Size (HQ Mode Only)
Two options are available:
HQ 1080i
•
- Sets the HQ (35Mb/s) frame size to 1440x1080
1440
•
- Sets the HQ (35Mb/s) frame size to 1920x1080
1920
Set Timecode Mode
Four
TIMECODE
•
EXTERNAL
RP188 timecode in the HD-SDI input stream (Default TC
display mode)
•
- The timecode recorded comes from the
FREE RUN
internal, constantly incrementing free run timecode
generator in the FS-T1001. It is possible to set the TC
value using the TC Set function in the setup menu.
options are available:
- Retro Cache mode continuously records
options are available:
options are available:
- The timecode recorded comes from the
FS-T1001 Media Recorder - 13
Quick Start