Network Streaming; Date/Time; Ntp - LG LRH7160D Series Owner's Manual
Hybrid digital video recorder
Hide thumbs
Also See for LRH7160D Series:
- Owner's manual (2 pages) ,
- Owner's manual (90 pages) ,
- Owner's manual (71 pages)
Table of Contents
Advertisement
please check network connection.
When you want to change DDNS host name
If you want to change the registered host name to new one, follow
as shown below.
1. Enter a new host name in the [Host Name] option.
2. Press the [Update] button. The confirmation window will be
displayed to change your host name.
3. Click the [OK] button. When host name is properly changed, the
changed host name will be displayed in the [Registered Host]
option. If host name is not changed after updating, please check
network connection.
Network Streaming
•
CH: Displays the channel number.
•
Resolution : Selects the recording resolution.
•
Quality: Selects the recording picture quality.
•
Frame Rate: Selects the frame rate. The frame rate is the number
of transportable frames per second. According to resolution, the
frame rate is set automatically. If you wish to set manually, refer
to the below.
Resolution
352*240
NTSC
704*240
704*480
352*288
PAL
704*288
704*576
Frame Rate
1, 3, 5, 7.5, 10, 15
1, 3, 5, 7.5
1, 3
1, 3, 5, 6, 7.5, 12.5
1, 3, 5, 6
1, 3
Date/Time
•
Date: Select the current year, month and day.
•
Time: Select the current time.
•
Date Format: Select the date display format.
•
Time Format: Select the time display format.
•
Time Zone: Select the time zone in the area where the DVR is
installed.
•
Daylight Saving: Mark up if you want to use the daylight saving
function.
•
Daylight Saving Start: Select the Daylight Saving start time.
•
Daylight Saving End: Select the Daylight Saving end time.
NTP
•
NTP: Marks up, if you want to synchronize the DVR's date and
time with those of the time server called NTP. (Network Time
Protocol) Specify the NTP server's name.
•
Time Server: For most cases select public. The DVR will obtain
the average time among 5 public servers (time.nist.gov, time-a.
nist.gov, time-b.nist.gov, ntp.nasa.gov, clock.isc.org).
•
Private Time Server: Enter the private time server's IP address or
host name using the virtual keyboard.
•
Sync. Interval: You can set synchronized intervals with the NTP
time server to 1 day, 1 week, 1 month and 1 hour.
•
NTP Test: Select [NTP Test] to test the NTP server.
NOTE
If the NTP option is not set to this system, there can be a
gap between the system time and actual time. Using NTP is
recommended.
Installation
29
3
Advertisement
Table of Contents
