Viewing The System Log List - LG LRH7160D Series Owner's Manual

NOTE
• Check the export device before you proceed.
• You can also use the COPY button on the front panel for
export function.
• You can export the recorded data only in the live mode.
• If you use the external device, the external device has to be
formatted on this unit.
1. Connect the external device to the USB port on the front
or the rear of the DVR.
2. Select the [Format] icon then press OK.
Confirm window is displayed after format is completed.
3. Select [OK] and press OK to close the window.
• Check the size of the selected data and free space of the
external device. If the device does not have enough space,
create space on the device or erase the previously stored data.
• Export can not be executed while the backup is in progress.
• You can search the exported data with the supplied viewer
software.
• When you export the recorded data, the video data, audio
data, the system log and event log data will also be exported.
• When you export the recorded data the export viewer
program will also be exported in the [ExportViewer] folder of
the device. The exported data file name is made automatically
as the [Channel name_export date_export time.exp] type.
• Do not remove the USB device while the export is in progress,
it may cause a malfunction.
• The warning message appears for the conditions listed below.
- When the start date/time and end date/time are the same
value.
- When the start date/time is later than the end date/time.
- The export media does not have enough space.
- When you set the time for data that does not exist.
• An external media has to be formatted on this unit to prevent
a malfunction.
• DVD+RW and DVD-RW discs have to be initialized before
using.

Viewing the System Log List

To view the system log list:
1. Press the LOG button or click the
bar. The system log list window is displayed on the main
monitor.
2. Set the [Start Date/Time] and [End Date/Time] to search.
• a/d/w/s: Moves to the options.
• w/s: Sets the selected option.
• OK: Selects option or confirms the setting.
3. Use a/d to see the previous or next log list.
4. Press the BACK button or click the [Close] button to exit the
window.
NOTE
Refer to the following system log list.
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Installation
icon in the system control
Log Message
Power On
Power Off
Login (Remote)
Logout (Remote)
Login (Local)
Logout (Local)
Configuration Changed
Configuration Imported
Factory Default Set
Power Recovery
Backup Started
Backup Finished
Backup Failed
Export Started
Export Finished
Export Failed
S/W Updated
HDD Damaged
HDD Added
HDD Deleted
HDD Formatted
HDD Changed
25
3