Related Manuals for LG LRN3040N Series
Summary of Contents for LG LRN3040N Series
- Page 1 OWNER’S MANUAL Network Video Recorder Please read this manual carefully before operating your set and retain it for future reference. MODEL LRN3040N Series 1404 (V3.0)
-
Page 2: Safety Information
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. LG Electronics hereby declares that this/these This equipment generates, uses, and can radiate radio frequency product(s) is/are in compliance with the essential... -
Page 3: Important Safety Instructions
Safety Information IMPORTANT SAFETY Disposal of your old appliance INSTRUCTIONS 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal 1. -
Page 4: Safety Warnings And Cautions
‘damaged’ while playing a recording stored inside the system’s HDD, it must be replaced with a new one. Ask for an engineer’s assistance for HDD replacement from your dealer. LG Electronics is not responsible for deleted data caused by user mishandling. •... - Page 5 In order to maintain stable system performance, have your system checked regularly by the service center. LG Electronics is not held responsible for system breakdown caused by user mishandling. There is a risk of explosion if a battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
-
Page 6: Table Of Contents
Contents Contents General Explanation of the Live Screen on the Main Monitor Main Monitor Screen Moving the Channel's Position Selecting the Split mode Changing the order of cameras PTZ Camera Control Using the Digital Zoom function Safety Information Export the recorded data IMPORTANT SAFETY INSTRUCTIONS Viewing the System Log List Viewing System Information... - Page 7 Contents Factory Default Configuration Settings Emergency SNMP IP Live/Playback Specifications Output Specifications Buzzer User settings Group Authority User Setup Wizard settings Step 1 Step 2 Step 3 Step 4 Operation Instant Recording Panic Recording Instant Playback Search and Playback Date and Time Search Event Search Bookmark/Protect Search Export Search...
-
Page 8: Preparation
Preparation Preparation Introduction Accessories CD (Software and Owner's Mouse Model LRN3040N (4 Channel) is used for the description, operation Manual) and details provided in this operating guide. Remote AAA type Features Control batteries • Stable embedded Linux operating system. • Journal filing system for HDD file recovery following power recovery. -
Page 9: Front Panel
Preparation Front Panel POWER H.264 Network Video Recorder a b c d Remote Sensor: Point the remote control here. Power Indicator: Lights when the system is powered. HDD Indicator: Lights when the HDD is accessed. NET Indicator: Blinks when the network is connected. USB Port: Connects an external USB device for backup or playback. -
Page 10: Remote Control
Preparation Remote Control Button Description POWER (1) Turns system off. LOGIN Displays the User Log-In dialog box or logs out. Set the appropriate system ID to operate via the IR Remote Controller when using the multiple system. Press the ID button then press the number button within 2 seconds to select the system ID of the system. -
Page 11: Installation
Installation Installation Connections Precautions • Depending on the camera and other equipment there are various ways to connect the unit. Please refer to the camera manual or manuals for other devices as necessary for additional connection information. • Be sure to switch off the camera before installation and connection. Basic Connection Overview Connect an external USB device for backup or playback. -
Page 12: Connecting Display Device
Installation Connecting Display device Connecting Audio device This unit can be output simultaneously from the HDMI and VGA Connect the AUDIO OUT jacks on the unit to the mono audio in jack. The video signal connects between the system and the jacks on your audio device. -
Page 13: Connecting E-Sata Device
Installation USB External device LAN connection Connect the external device to the USB port. Connect the LAN port to an available 10/100/1000 base-T port with (Example: External HDD or other external storage.) a straight ethernet cable (not supplied). The NET indicator on the front panel will be lit. -
Page 14: Connecting Lkd1000 Controller
Installation Connecting LKD1000 Controller Connecting Alarm Input and Alarm Output This system has a data terminal. Use this port to connect keyboard (optional). Alarm terminals are used to connect the alarm devices such as sensors, door switches, etc. RS-485 Terminal Description - (DATA -) Data Transmission/Reception... -
Page 15: Hdd Installation
Installation HDD INSTALLATION Alarm Output Connect the alarm device to the alarm output. Alarm signal outputs when an event occur. Alarm output connection ALARM DC 48 V 0.5 A - + 1 2 3 4 G 1 2 G Note for Hard Disk Drive The internal hard disk drive (HDD) is a fragile piece of equipment. -
Page 16: Replacing The Hard Disk Drive
Installation ALARM DC 48 V 0.5 A - + 1 2 3 4 G 1 2 G ALARM DC 48 V 0.5 A - + 1 2 3 4 G 1 2 G AUDIO HDMI E-SATA AUDIO HDMI E-SATA Replacing the Hard Disk Drive Detach the top case by sliding it after removing the screws. -
Page 17: System Operation
Installation System Operation General Explanation of the Live Screen on the Main Monitor 1. Turn on the unit. System booting will commence. The LG logo image will be displayed on the main monitor during the system Main Monitor Screen booting. -
Page 18: Moving The Channel's Position
Installation Moving the Channel's Position g System Control Bar Displays the CPU usage and Data traffic You can change the camera channel's position in a split screen of level of IP cameras. the Main Monitor. Displays date and time. 1. Select a desired channel by clicking the left button of the mouse. -
Page 19: Changing The Order Of Cameras
Installation Changing the order of cameras To delete a memorized preset position. You can change the order of the cameras shown on the monitor. To move the camera to the preset 1. Press CAM or click the icon in the system control bar. position. -
Page 20: Using The Digital Zoom Function
The saved native file can playback using the Export Viewer program. • AVI LG: To playing AVI LG file, you have to install the LG DVR Using the Digital Zoom function Codec. If you install the LG Network Client, do not need to install the LG DVR Codec. -
Page 21: Viewing The System Log List
Installation Viewing the System Log List NOTE To view the system log list: • Check the export device before you proceed. 1. Press the LOG button or click the icon in the system control • You can also use the COPY button on the remote control for bar. -
Page 22: Viewing System Information
Installation Configuration menu Viewing System Information To view system information: 1. Press the INFO button or click the icon in the system control bar. The features and options of the system are configured through the menu. The operations of this unit can be set via a menu displayed on the main monitor. -
Page 23: System Settings
Installation System settings Setting the Menu Using the Remote Control Buttons Remote Description Control Properties Use these buttons to select the menu options or adjust the options value. Select the option or confirm the setting. Return to the previous menu or level. 1. -
Page 24: Tcp/Ip V4
IP address. • Host Name: Enter the host name you want to use. You can not use the “www”, “mail”, “http”, “ftp”, “com”, “lg”, “lge”, “lgddns”, “lgeddns”, “ddns” for host name. • Interface: Select a LAN port you want to use. -
Page 25: Network Streaming
Installation When you want to change DDNS host name function. If you want to change the registered host name to new one, follow • Daylight Saving Start: Select the Daylight Saving start time. as shown below. • Daylight Saving End: Select the Daylight Saving end time. 1. -
Page 26: Update
Installation Update Backup This function is aimed at upgrade the system software. In this case, the current system settings are not deleted or replaced during the update process. • Schedule: You can set the backup schedule. OFF: All options are disabled. WEEKLY or DAILY: The backup data will be automatically saved according to the setting. - Page 27 Installation Daily/Weekly backup NOTE 1. Connect the USB device for backup. • The backup function is not supported on the external USB 2. Select WEEKLY or DAILY on the schedule options. CD-ROM driver. 3. Select the backup device. • Available external device for backup. 4.
-
Page 28: Device Settings
Installation Device settings NOTE • In case of same driver and same model, even if you select several channels, the [Setup] button is activated. • The setting of the smallest channel number among the selected channels is displayed. And, you can configure the IP Device same settings. - Page 29 Installation To register the IP device manually GOV (ONVIF only): It means “Group of VOPs”. The VOP is an image frame in the MPEG-4 video stream. Edit the value of GOV from 1 to 30. Quality: Select the Quality. Stream Quality (LGE only): If the [Quality] option set to VBR, this option is displayed.
-
Page 30: Storage
Installation Display settings NOTE • If you register the IP camera for plug and connect, [HTTP Port] and [RTSP Port] number per each channel are assigned as below. HTTP Port RTSP Port 1080 1554 2080 2554 3080 3554 4080 4554 •... -
Page 31: Record Settings
Installation Record settings 2. Select a recording mode. Normal Schedule Recording A Normal schedule recoding can be activated at preset times, in a repeating pattern on selected weekdays. The system can record according to a schedule set by the user. It can also record manually regardless of date and time. -
Page 32: To Set A Recording Schedule For A Special Day (Special Schedule)
Installation 3. Drag and drop with left button of the mouse to set the channel 3. Use w/s/a/d to enter the necessary information for year, and time you want to record. The color of the time block is month and date. You can use the calendar icon to select the changed depending on the selected mode. -
Page 33: Sensor
Installation Event settings Sensor Settings concerning sensor recording. Sensor • CH: Displays the channel number. • Prealarm: Specify the pre-event recording time. When the Event signal is detected, the system recordes the data before the • In: Displays the number of the ALARM-IN terminal. event during the setting time. -
Page 34: Mail
Installation Mail Emergency • Notification: Mark up to be notified the unit's operating • Notification: Mark up to be notified the emergency agent about information according to notification settings by e-mail. the unit's operating information according to your notification settings. •... -
Page 35: Buzzer
Set the authority for the selected group. Mark up the option to activate it. • Main Channel: Selects the channel to allow the operation for the group user. The LG logo is displayed on the covert channel(s). • Sensor: Makes a sound when a sensor occurs. •... -
Page 36: User
Installation Setup Wizard settings User You can set the user name for the selected User ID. The Setup Wizard appears on the screen when you turn on the unit for the first time or select [Setup Wizard] on the Setup menu. You can set the system name, display language, date, time, network settings, recording schedule and recording mode on the initial setup wizard. -
Page 37: Step 2
Installation Step 2 Step 4 Set date and time. Set recording schedule. • Date: Select the current year, month and day. • Weekday: Sets the recording mode to weekday (Mon-Fri). • Time: Select the current time. • Weekend: Sets the recording mode to weekend (Sat-Sun). •... -
Page 38: Operation
Operation Operation Instant Recording Panic Recording Images from a camera will be recorded on the built-in hard disk. You can record the all channels at the same time. Ensure all the cameras are connected and that time and date have This function can operate video input channel only. -
Page 39: Instant Playback
Operation Instant Playback 7. Press ad (Play) button or click button to start playback. The picture(s) is (are) displayed on the main monitor. 8. Press STOP (Z) to stop playback and return to the search menu. 9. Press BACK repeatedly to exit the [Date/Time] menu. It is possible to play a recorded image without stopping recording. -
Page 40: Bookmark/Protect Search
Operation Export Search 5. Use w/s/a/d button to select the channel and press OK button to confirm the selection. If you want to select the all Searches an exported data in the external device. channels, marks up the [Select All] option. If you want to use this function, you have to connect the external 6. -
Page 41: Functions Available During Playback
Operation Functions Available During Playback Button Function Playback Remote Control Control Menu Stops playback. Pauses playback. Jumps to the beginning of the current data recorded on the same date. (press the button for more than 2 seconds.) Jump to the last 1 minute of the current data recorded on the same date. (press the button for more than 2 seconds.) Press repeatedly to select the required scan speed. -
Page 42: Using The Playback Control Menu
Operation Using the playback control menu Using the Protect function You can use various playback function using playback control menu. This function allows you to protect the recorded data against being automatically overwritten. 1. Play a data recorded. Playback control menu appears at the bottom of the screen. How to select Protect section. -
Page 43: Troubleshooting
Troubleshooting Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptoms Cause & Solution Check the power cable is connected correctly. The system power does not Check the input voltage is correct. turn on. If the system power does not turn on even if the power cable is connected correctly, please contact the service center. - Page 44 Troubleshooting Symptoms Cause & Solution Check the audio recording option is correctly set for the camera you wish to record audio. Audio data recorded with Check the speaker on the rear of system are connected correctly. video data is not playing. Check the connected speaker is working properly.
-
Page 45: Appendix
Appendix Appendix Recommended Devices Recommended USB Memory list Maker Model Name Capacity LG Electronics XTICK SPIN LG Electronics XTICK UF1 32 G Lexar Jump Drive Memorive TRANSCEND 16 G SKYDRV SANDISK Cruzer 16 G Samsung Electronics SUM-LSB8 Samsung Electronics SUM-PSB... -
Page 46: Supported Function List For Device
Appendix Supported function list for device Device Instant backup Schedule backup Export Configuration Import/Export USB memory USB HDD E-SATA HDD NOTE If you use a USB memory stick or USB HDD for configuration import/export you must disconnect the other external USB devices. Supported IP Camera Audio/Video Codec Item Codec... -
Page 47: Time Zones
Appendix Time zones Timezone Timezone name Timezone Abbreviation Eniwetok, Kwajalein -12:00 Midway Island, Samoa -11:00 Hawaii -10:00 Alaska -09:00 -08:00 Pacific Time (US and Canada); Tajuana -08:00 -07:00 Mountain Time (US and Canada), Chihuahua, La Paz, -07:00 -06:00 Mazatlan, Arizona Central Time (US and Canada), Saskatchewan, Guadalajara, Mexico City, Monterrey, -06:00 -05:00... - Page 48 Appendix Factory Default Configuration Settings Factory Default 1st level 2nd level 3rd level Default Value setting System Name NULL Language The option depends on the model. Button Beep Properties Resolution 1024*768 Configuration Import Configuration Export Factory Default Interface Ethernet0 DHCP IP Address NULL TCP/IP4...
- Page 49 Appendix Date Current Date Time Current Time Date Format YYYY/MM/DD Time Format 12 HR Date/Time Time Zone The option depends on the model. Daylight Saving Daylight Saving Start JAN, 1st, SUN, 00 Daylight Saving End JAN, 1st, SUN, 00 Time Server PUBLIC SERVER Private Time Server NULL...
- Page 50 Appendix CH 01 Name CH 01 to CH 04 Model Name NONE NULL NULL HTTP Port Driver NULL Profile1 NULL IP Device Profile2 NULL RTSP Port RTP Mode Stream NULL Device Audio Recording Setup Delete Auto Manual Overwrite Full Warning Auto Delete Storage Saving Storage...
- Page 51 Appendix Current day of the week Mode C+S+M Normal Schedule Channel Copy Day Copy List Item 1 Name NULL Date --/-- Special Schedule Mode C+S+M Record Delete Channel Copy Sensor Prealarm 10 SEC Postalarm 10 SEC Motion Prealarm 10 SEC Postalarm 10 SEC Sensor Type...
- Page 52 Appendix Notification SMTP Server NULL SMTP Port User Name NULL Password NULL Mail Mail Address 1 NULL Mail Address 2 NULL Mail Address 3 NULL Sender NULL JPEG Attachment E-mail Test Notification Emergency Host Name NULL Port 9002 Event SNMP Version NONE Port Community String...
- Page 53 Appendix Group ID GUEST Group Name GUEST Setup Search/Play Group Authority Export Power Off User Instant Record Main Channel All Enable User ID ADMINISTRATOR User Name ADMINISTRATOR User Group ADMINISTRATOR Password "000000" Auto User Logout...
-
Page 54: Specifications
4 (I-Frame Only) 5M Pixel x 2ch + any 1ch 1fps x 4ch 4 (I-Frame Only) Over channel & resolution 4 (I-Frame Only) Specifications Model LRN3040N Series Input 4 Ch (Up to 5 Mega-pixel) Video Output HDMI Input Audio Output... - Page 55 Appendix Network Connection Ethernet 10/100/1000 Mbps Network Bandwidth Control Power DC 48 V, 2A (Adaptor AC 100~240V, 50/60 Hz) Power Consumption Maximum 18 W (without HDD) Dimension (W x D x H) 264 mm x 240 mm x 44 mm Net Weight 1.50 kg (without HDD), 2.12 kg (with HDD) Operating Temperature / Humidity...
- Page 56 AB28...