Operation; Instant Recording; Panic Recording - LG LRH7160D Series Owner's Manual

4

Operation

Instant Recording

Images from a camera will be recorded on the built-in hard disk.
Ensure all the cameras are connected and that time and date have
been set correctly.
Before you start recording, first check the repeat recording settings
in the recording menu of the system setup, and then make the
recording settings.
1. Press the REC button and then press the channel button you
want to record. The recording type indicator turns gold on the
selected channel screen of the main monitor.
FOCUS+ IRIS+
3 4
FOCUS - IRIS -
7 8
SET CLEAR
SHIFT
11 12
MOVE TOUR
15 16
2. Press the REC button and then press the channel button you
want to stop recording. If you stop instant recording, the
recording mode will be changed into the scheduled recording
mode (Continuous/ Sensor / Motion records). If the schedule is
not set, the button indicator turns off and the recording type
indicator turns gray on the selected channel screen of the main
monitor.

Panic Recording

You can record the all channels at the same time.
This function is activated for a live channel only.
1. Press and hold the REC button until the Recording Type
indicator turns gold on the all live channel screens.
The DVR will start recording.
2. Press and hold the REC button until the Recording Type
indicator turns gray on the all live channel screens. The DVR will
stop recording.
REC
SEARCH SETUP
LOG-IN VIEW CAM BACK
NOTE
• External recording devices can be used as copy areas for
images recorded on the hard disk. It is impossible to record
images on the external recording devices directly.
• You can record instantly with the left mouse button.
1. Move the cursor to the desired channel screen on the
main monitor.
2. Click the recording type indicator with the left mouse
button and recording starts. Click it once again and the
instant record stops and the recording type indicator
will be changed into the scheduled recording mode
(Continuous / Sensor / Motion record). If the schedule is
not set, the recording type indicator turns gray.
• You can use the instant recording also for the channels
scheduled such as sensor, motion or continuous.
• Once you stop instant recording, the recording type indicator
will be changed to the scheduled recording mode.
• You can not record the Instant and Continuous recording in
following conditions.
- A HDD is not attached.
- A HDD is not formatted.
- The channel has no video input for display.
-
Overwrite is set to "OFF".
- The schedule (Sensor/Motion) record is not set.
• Priority of record.
Instant record > Sensor record > Motion record > Continuous
record.
• The Warning message is displayed when the HDD problem
occurs during the recording.
Operation 47
4