Wireless Headset; Wideband Headset; Speakerphone; Autoanswer With Headset Or Speakerphone - Cisco 7975G Software Manual

Unified ip phone user guide for cisco unified communications manager 9.0 (sccp and sip)
Hide thumbs Also See for 7975G:
Table of Contents

Advertisement

Handset, Headset, and Speakerphone

Wireless Headset

Cisco Unified IP Phones 7945G, 7965G, and 7975G support wireless headsets. Refer to the wireless headset
documentation for information about using the wireless headset remote features. Also, check with your system
administrator to be sure your phone can use a wireless headset with the wireless headset remote hookswitch
control feature.

Wideband Headset

If you use a headset that supports wideband, you may experience improved audio sensitivity if you enable
the wideband setting on your phone (this setting is disabled by default). To access the setting, choose
> User Preferences > Audio Preferences > Wideband Headset.
If the Wideband Headset setting is dimmed, then you cannot control this setting.
Check with your system administrator to be sure your phone system is configured to use wideband. If the
system is not configured for wideband, you may not detect any additional audio sensitivity even when using
a wideband headset. To learn more about your headset, refer to the headset documentation or contact your
system administrator for assistance.

Speakerphone

If the handset is in its cradle and
call will trigger speakerphone mode automatically.
If you want to...
Toggle speakerphone mode on or off
Switch to a handset
Adjust the volume level for a call

AutoAnswer with Headset or Speakerphone

When AutoAnswer is enabled, your phone answers incoming calls automatically after a few rings. Your
system administrator configures AutoAnswer to use either the speakerphone or a headset. You may use
AutoAnswer if you receive a high volume of incoming calls.
is not lit, many of the actions you can take to dial a number or answer a
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G User Guide for Cisco Unified Communications
Then...
Press
.
Lift the handset.
Press
during a call or after invoking a dial tone.
Press Save to preserve the volume level for future calls.
Wireless Headset
Manager 9.0 (SCCP and SIP)
63

Advertisement

Table of Contents
loading

This manual is also suitable for:

7971g-ge7970g7965g7945g

Table of Contents