Headset; Control Wired Headset Sidetone - Cisco 7975G Software Manual

Headset

Headset
Your phone supports four- or six-wire headset jacks for wired headsets. Cisco Unified IP Phones 7945G,
7965G, and 7975G also support wireless headsets. For information about purchasing headsets, see
Support, on page
You can use a headset with all the controls on your phone, including
However, if you use a wireless headset, refer to the wireless headset documentation for instructions.
If you want to...
Toggle headset mode on and off
Switch to a handset
Adjust the volume level for a call
If you use AutoAnswer, see

Control Wired Headset Sidetone

When you speak on a telephone using a headset, the sound picked up by the headset microphone can be sent
back through the headset speaker. This creates a low-level feedback, known as sidetone. The wired headsets
can result in sidetone. Different wired headsets require different sidetone settings. You need to select the best
sidetone level for the wired headset you use. To reduce the sidetone levels, follow these steps:
Procedure
Step 1
Press
Step 2
Use the Preferences menu and navigate to Headset Sidetone.
Step 3 Select Headset Sidetone.
Step 4 Select one of the sidetone levels:
• High
• Normal
• Low
• Very Low
• Off
Step 5 Press Save or press Cancel.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G User Guide for Cisco Unified Communications
Manager 9.0 (SCCP and SIP)
62
16.
Then...
Press
Lift the handset.
Press
Press Save to preserve the volume level for future calls.
AutoAnswer with Headset or Speakerphone, on page
.
Handset, Headset, and Speakerphone
.
during a call or after invoking a dial tone.
Headset
and .
63.