Sip And Sccp Signaling Protocols; Energy Savings - Cisco 7975G Software Manual

SIP and SCCP Signaling Protocols

Feature
Redial
Remove Last Conference Party
Transfer
Video Support
SIP and SCCP Signaling Protocols
Your phone can be configured to work with one of two signaling protocols: Session Initiation Protocol (SIP)
or Skinny Call Control Protocol (SCCP). Your system administrator determines the protocol your phone uses.
Phone features can vary depending on the protocol. This Phone Guide indicates protocol-specific features.
To learn which protocol your phone uses, contact your system administrator or can choose
Information > Call Control Protocol on your phone.

Energy Savings

Your phone supports the Cisco EnergyWise program. Your system administrator sets up sleep (power down)
and wake (power up) times for your phone to save energy.
Ten minutes before the scheduled sleep time and if the audible alert is enabled by your system administrator,
you hear your ringtone play. The ringtone plays according to the following schedule:
• At 10 minutes before power down, the ringtone plays four times
• At 7 minutes before power down, the ringtone plays four times
• At 4 minutes before power down, the ringtone plays four times
• At 30 seconds before power down, the ringtone plays 15 times or until the phone powers down
If your phone is inactive (idle) at the sleep time, you see a message to remind you that your phone is going
to power down. To keep the phone active, press any key on the phone. If you do not press any key, your phone
powers down.
If your phone is active (for example, on a call), your phone waits until it has been inactive for a period of time
before informing you of the pending power shutdown. Before the shutdown happens, you see a message to
remind you that your phone is going to power down.
At the scheduled time, your phone powers up. To wake up the phone before the schedule time, contact your
administrator.
Wake and sleep times are linked to the configured days that you normally work. If your requirements change
(for example, your work hours or work days change), contact your system administrator to have your phone
reconfigured.
For more information about EnergyWise and your phone, contact your system administrator.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G User Guide for Cisco Unified Communications
Manager 9.0 (SCCP and SIP)
12
Softkey Line button label and icon
Redial
Redial
RmLstC
Remove Last Participant
Transfer
Transfer
VidMode
Video
Phone Features
> Model