Cisco Unified Ip Phone 7945G And 7965G Cleaning And Maintenance; Feature Buttons And Menus - Cisco 7975G Software Manual

Phone Features
If you want to...
Disable the touchscreen for
cleaning
Enable the touchscreen
(after disabling it)
Wake the touchscreen from
power save mode

Cisco Unified IP Phone 7945G and 7965G Cleaning and Maintenance

Use only a soft, dry cloth to wipe the phone screen. Do not use any liquids or powders on the phone, as they
can contaminate phone components and cause failures.
When the phone is in Power Save mode, the touchscreen is blank and the Display button is not lit. When the
phone is in this condition, you can clean the screen, as long as you know that the phone will remain asleep
until after you finish cleaning. If the phone is likely to wake up during cleaning, wait until it is awake before
following the preceding cleaning instructions.
If you want to...
Wake the phone screen
from power save mode

Feature Buttons and Menus

Press a feature button to open or close a feature menu.
Then...
Press
The screen remains disabled for about a minute, unless you enable it.
Press
Press the touchscreen or any button, or lift the handset.
After a period of inactivity (determined by your system administrator), the
touchscreen enters the power save mode to save power. In this mode, the
touchscreen appears blank and the Display button
Then...
Press any button or lift the handset.
After a period of inactivity (determined by your system administrator), the phone
screen enters the power save mode to save power. In this mode, the phone screen
appears blank and the Display button
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G User Guide for Cisco Unified Communications
and hold for more than 1 second.
(flashing) and hold for more than 1 second.
Feature Buttons and Menus
flashes.
remains lit.
remains lit.
Manager 9.0 (SCCP and SIP)
9