Xml Configuration File - Snom ONE Technical Manual

XML Configuration File

The configuration options in the XML file are set in the
and sample values are shown below:
Table 20-1. Available Options in
Parameter
page
moh
log
dev
priority
multicast
ptime
dtmf
map
codec
ipv4
ipv6
pagmoh.xml
Defines the port where to listen for RTP traffic. If speci-
fied, it binds the socket to the provided address.
Defines where to send the MoH stream. If the destina-
tion contains only the port number, the destination is the
loopback device.
Sets the log level. Valid levels are 0–9.
Sets the audio device.
Defines whether the process should run at high priority or
not.
Joins a multicast address.
Specifies the packet length in ms.
Defines what codec to use for out-of-band DTMF.
Sets the codec mapping. The argument is a list that maps
the codec number to codec names.
Specifies the codec that should be used for sending. The
parameter is the name of the codec.
Use only IPv4.
Use only IPv6.
Chapter 20: Music on Hold
parameter:value
Function
format. Available parameters
Example
5000
6000
5
True
False
Multiples of 10
l16 , ulaw , alaw
gsm g722
, , and
g726
ulaw
True
False
249
,