Snom ONE Technical Manual page 71

Use last 7 digits when cellphone matching: If this is checked, the system will use the last 7 digits
■
to match cell phone numbers. This is useful in places where only 7 digits are used in the caller-ID.
Send welcome email when an extension is created: If this setting is checked, new users will auto-
■
matically receive a welcome email.
Delete all aliases when deleting the primary account: Aliases will be deleted when primary ac-
■
counts are deleted.
From/To Headers
From header when switching the domain: This setting allows you to set a new
■
It is used when the system switches the domain context for calling an extension. You may enter
several dollar-escaped characters into this field using the values shown in
the string $d: $n
name was set to
ting is empty, the system will not change the header.
Table 3-3.
Value
d
The domain name of the calling
(source) domain
e
The domain name of the called (desti-
nation) domain
n
The original content of the header
x
Parameter 1 of the called extension
y
Parameter 2 of the called extension
z
Parameter 3 of the called extension
x y z
, , and are fields that can be used for additional information.
To header when switching the domain: This setting allows you to set a new
■
used when the system switches the domain context for calling an extension. You may enter several
dollar-escaped characters into this field using the values shown in
Change names in To/From-headers: Usually it is okay if the system changes the names in the
■
To/From headers in the SIP packets. For example, this makes sense when the address book match-
es the caller-ID and the system should present the address book entry. However, if the system is
used as a SIP device in an operator environment, you may want to make sure that the system does
not change headers. In this case, you can turn this flag on.
CDR Settings
CDR URL: This setting allows you to configure where and how the CDRs are written for a spe-
■
cific domain. This setting will override the configurations that are made at the system level for the
domain. The system supports several types of CDR generation formats, apart from writing them
will produce an output like
Company A
and the original content of the header was
Parameters Used for Setting the From and To Header
Output
Chapter 3: Administering the Domain
Company A: John Smith
Example
Company A
called.domain.com
John Smith
From header.
Table 3-3. For example,
if the source domain
John Smith.
To header. It is
Table 3-3.
55
If this set-