Assigning A Dollar Amount To An Extension; Methods Of Access; Extension - Snom ONE Technical Manual

5. Enter your own calling rates in the space under the sample rates table.
Important: In the event a blank field sits between two other fields (e.g., you're requiring a connec-
tion fee but will not be changing the Duration of Unit default, as shown in the table below), you will
need to make provision for this empty space in your CSV syntax. CSV syntax in this case would be
Greece,01130,0.10,,1.00
Name of Entry
Greece
All other trunk settings are detailed in

Assigning a Dollar Amount to an Extension

Before a user can begin using the pre-pay calling card account, a dollar amount must be specified in the
extension account:
1. Open the user's extension, and click the Registrations tab.
2. In the Credit for outbound calls setting, enter a dollar amount.
Important: If this field is left blank, the user will be allowed unlimited calling.
Note: Users can execute the Show Account Balance (*61) star code to determine the number of min-
utes that are left on the pre-paid account.

Methods of Access

The pre-pay feature can be accessed via the extension, the Personal Virtual Assistant, or the calling card. This
section details each method.

Extension

This method does not require a calling card. Once the rates table has been added to the trunk and the exten-
sion has been assigned a dollar amount, all calls made from the extension will be calculated according to the
rates table assigned to the trunk. To determine the number of minutes remaining on the account, the user
can execute the Show Account Balance (*61) feature.
(notice the double commas).
Cost per
Prefix Unit
01130 0.10
Chapter
Chapter 15: Pre-Pay Feature
Duration of Unit Connection
(seconds)* Fee
1.00
4.
185