Manual Tuning - Dab - Roberts classic blutune User Manual

Manual tuning - DAB

Manual tuning allows you to tune your radio to a particular DAB frequency
in Band III. Any new stations found will be added to the station list. This
function can also be used to assist the positioning of the aerial or the radio
to optimise reception for a specifi c channel or frequency. Note that UK
DAB stations are located in the range of channels 11B to 12D.
1. Press and hold the Menu button. The DAB menu will show on the
display.
2. Rotate the Tuning control until the display shows 'MANUAL'. Press
and release the Tuning control to enter the manual tune mode.
3. Rotate the Tuning control to select the desired DAB channel.
4. Press and release the Tuning control to tune to the chosen frequency.
5. If a signal is present, this will be indicated on a signal strength display.
The minimum signal marker ( ) shows the minimum signal strength
needed for good DAB reception. The signal indicator chevrons go up
or down showing the changing signal strength as you adjust the aerial
or your radio position. Press and release the Tuning control again to
return to the normal DAB tuning mode.
11
1
2-5