Ac Supplies And Alarms - Dell C7008 Installing

Table A-1. Alarm Events and Reporting
Module Alarm Event
Line Card Hardware failure
Exceeds high temperature limit
Exceeds warning temperature limit
Individual interface fails
RPM (Non-redundant Configuration with 1 RPM)
Exceeds high temperature limit
Exceeds warning temperature limit
RPM fails but CP is ok

AC Supplies and Alarms

During system boot, if a redundant supply is removed or fails, the Dell Networking generates a minor
alarm message.
If only two supplies are installed and one of them fails, the software generates an alarm and an SNMP
trap (if configured), and lights the RPM alarm LED and supply LED.
62 | Alarms
Alarm LED Reported in
event log
major (red) major
major (red) major
minor (amber) minor
minor (amber) reported
major (red) major
minor (amber) minor
major (red) major
Status LED on
Module
amber
unlit
green
amber
unlit
green
amber