Dell C7008 Installing page 21

NOTE: The fan tray face panel has slot number markings for the RPMs and line cards. Insert the fan tray
before the line cards to simplify RPM and line card installation.
Step Task
Extend the left and right card levers by first pressing gently down on the thumb tabs (see
1
levers and then pulling the ejector levers simultaneously until they are in the open position. See
Figure 5-1. Depress the thumb tabs
Figure 5-2. Extend the levers
Hold the card assembly by the metal carrier edges. Avoid touching the printed circuit board and connector pins.
2
Align the card with the guide, and gently slide it into any line card slot until the card is about halfway into the slot.
3
NOTE:
Use the markings on the fan tray to determine which slots are for the RPMs and which are for the line
cards.
Continue sliding the line card until you feel the connectors engage with the chassis backplane.
4
Figure 5-1) in the ejector
Figure 5-2.
Installing RPMs and Line Cards | 21