Listening To The Dab Tuner - JVC KD-ABT22 Instructions Manual

Listening to the DAB tuner

Before operating, connect the JVC DAB tuner, KT-DB1000 (separately purchased) to the CD changer jack on the rear
of the unit.
Preparation: Make sure "Changer" is selected for the external input setting, see page 34.
1
Select "DAB."
2
Select the bands.
3 Searching for an ensemble.
Manual Search: Hold either one of the buttons until "M" flashes on the display, then press
it repeatedly.
4 Select a service (either primary or secondary) to listen to.
When surrounding sounds are
noisy
Some services provide Dynamic Range Control (DRC)
signals together with their regular programme signals.
DRC will reinforce the low level sounds to improve your
listening.
1
2
Select one of the DRC signals levels (1, 2, or
3).
• As the number increases, the effect becomes
stronger.
3
Exit from the setting.
appears on the display.
• will be highlighted only when receiving
DRC signals from the tuned service.
EXTERNAL DEVICES
Continued on the next page
23