Bluetooth Settings - JVC KD-ABT22 Instructions Manual

Bluetooth settings

You can change the settings listed below and on the
right column according to your preference.
• When is shown on the display, you can
move back to the previous screen by pressing number
button 3.
1
2
Select "Settings."
3
Select a setting item.
Ô
Auto Cnnct Auto Answer
Ô
MSG Notice *
1 MIC
Ô
Initialize Name
Ô
Phone Device *
2
(back to the beginning)
4
Change the setting accordingly.
• If "PhoneBook" is selected in step 3, see page 17
for details.
36
Ô
Ô Ô
PhoneBook
Ô Ô
Address Version
Ô Ô
Audio Device *
2
Setting menu ( : Initial)
Auto Cnnct (connect)
When the unit is turned on, the connection is
established automatically with...
Off: No Bluetooth device.
Last: The last connected Bluetooth device.
Auto Answer
On: The unit answers the incoming calls
automatically.
Off: The unit does not answer the calls
automatically. Answer the calls manually.
Reject: The unit rejects all incoming calls.
MSG Notice (message notice)
On *
1 : The unit informs you of the arrival of
a message by ringing and displaying
"Received Message."
Off: The unit does not inform you of the arrival of
a message.
MIC (microphone setting)
Adjust the built-in microphone volume,
[Level 01/02/03].
PhoneBook
Load the phone book of the Bluetooth phone to the
unit. (You can load up to 50 phone numbers.)
• Before using this function, make sure that the
Bluetooth phone is connected.
Initialize
Yes: Initialize all settings you have made in the
Bluetooth menu.
No: Return to the previous screen.
Name
Name of the unit (as shown on Bluetooth devices).
Address
Address of the unit.