JVC KD-ABT22 Instructions Manual page 69

3
Select "Memory."
4
Select a preset number ("Preset1"–
"Preset6") you want to store into.
5
Select one of the PTY codes.
6
Store the selected PTY code.
Ex.: When "Classics" is selected in step
7
Repeat steps 4 to 6 to store other PTY codes
into other preset numbers.
8
Exit from the setting.
Activating TA/PTY Standby
Reception
TA Standby Reception
1
2
either lights up or flashes on the display.
• If
to Traffic Announcement (TA), if available, from
any source other than AM.
The volume changes to the preset TA volume
level if the current level is lower than the preset
level (see page 34).
• If
activated. Tune in to another station providing
the RDS signals.
To deactivate TA Standby Reception, select "Off" in
step 2.
PTY Standby Reception
1
2
5
3
Select a PTY code.
lights up, the unit temporarily will switch
flashes, TA Standby reception is not yet
goes off.
Continued on the next page
OPERATIONS 11