JVC KD-ABT22 Instructions Manual page 179

5
Select one of the PTY codes.
6
Store the selected PTY code.
Ex.: When "Classics" is selected in step
7
Repeat steps 4 to 6 to store other PTY codes
into other preset numbers.
8
Exit from the setting.
Activating TA/PTY Standby
Reception
TA Standby Reception
1
2
either lights up or flashes on the display.
• If lights up, the unit temporarily will switch
to Traffic Announcement (TA), if available, from
any source other than AM and FM3 *.
The volume changes to the preset TA volume
level if the current level is lower than the preset
level (see page 30).
• If
activated. Tune in to another station providing
the RDS signals.
To deactivate TA Standby Reception, select "Off" in
step 2.
PTY Standby Reception
1
2
5
3
Select a PTY code.
4
Exit from the setting.
• If
to your favorite PTY programme from any source
other than AM and FM3 *.
• If
activated. Tune in to another station providing
the RDS signals.
To deactivate PTY Standby Reception, select "Off"
in step 2.
* The unit will not switch to Traffic Announcement or
PTY programme when a call connection is established
through the Bluetooth Phone.
flashes, TA Standby reception is not yet
goes off.
either lights up or flashes on the display.
lights up, the unit temporarily will switch
flashes, PTY Standby reception is not yet
goes off.
Continued on the next page
OPERATIONS 11