Listening To The Dab Tuner - JVC KD-BT12 Instructions Manual

Listening to the DAB tuner

Before operating, connect the JVC DAB tuner, KT-DB1000 (separately purchased) to the CD changer jack on the rear
of the unit.
Preparation: Make sure "CHANGER" is selected for the external input setting, see page 26.
1
Select "DAB."
2
Select the bands.
3 Searching for an ensemble.
Manual Search: Hold either one of the buttons until "MANUAL" flashes on the display,
then press it repeatedly.
4
Select a service (either primary or secondary) to listen to.
What is DAB system?
Digital Audio Broadcasting (DAB) can deliver digital
quality sound without any annoying interference and
signal distortion. When transmitting, DAB combines
several programmes (called "services") to form one
"ensemble." In addition, each "service"—called
"primary service"—can also be divided into its
components (called "secondary service"). A typical
ensemble has six or more programmes (services)
broadcast at the same time.
By connecting the DAB tuner, this unit can do the
following:
It is recommended to use DAB tuner KT-DB1000
with your unit. If you have another DAB tuner,
consult your JVC IN-CAR ENTERTAINMENT dealer.
• Refer also to the Instructions supplied for your DAB
tuner.
• See also "DAB AF" on page 25.
18
To tune in to an ensemble manually
Start searching for an ensemble, as in step 3 above.
1
2
Select a desired ensemble frequency.