Listening To The Ipod - JVC KD-ABT22 Instructions Manual

Listening to the iPod

You can play songs in an Apple iPod by connecting it with the USB cable supplied with your iPod to the USB cable
from the rear of the unit.
• You can control playback from the unit.
• Disconnecting the iPod will stop playback. Press SOURCE to listen to another playback source.
• For details, refer also to the manual supplied for your iPod.
Caution:
• Avoid using the iPod if it might hinder your safety while driving.
• Make sure all important data has been backed up to avoid losing the data.
1
—
2
3
—
Playback control from the unit
[Press] Go to the next or previous track
[Hold] Fast-forward or reverse the track during playback
[Hold] Enter main menu
[Press] Go to the top menu of "Playlists," "Artists," "Albums," "Songs," "Podcasts,"
[Press] Pause/resume playback.
22
Connect an iPod to the USB cable from the rear of the unit.
Playback starts automatically from where it had been paused previously.
• If an iPod has been connected, press SOURCE to select "USB-iPod" as the
playback source.
Select a track.
Adjust the volume and sound as you want. (See pages 25 – 27.)
"Genres," "Composers," or "Audiobooks" in the main menu.
• Pressing the number buttons (1 – 6) or holding 1 (7) and 2 (8) can also select the
preset top menus.