JVC KD-ABT22 Instructions Manual page 209

Symptoms
• The unit cannot be detected by the
Bluetooth device.
• The unit does not make pairing with the
Bluetooth device.
• Phone sound quality is poor.
• The sound is interrupted or skipped during
playback of a Bluetooth audio player.
• The connected audio player cannot be
controlled.
• The unit does not response when you tried
to copy the phone book to the unit.
Remedies/Causes
• Search from the Bluetooth device again.
• Reset the unit. When "Open..." appears on the display,
search from the Bluetooth device again.
Enter the same PIN code for both the unit and target
device.
• Reduce the distance between the unit and the
Bluetooth cellular phone.
• Move the car to a place where you can get a better
signal reception.
• Reduce the distance between the unit and the
Bluetooth audio player.
• Disconnect the device connected for "Phone."
• Turn off, then turn on the unit.
• When the sound is not yet restored: Connect the player
again.
• Check whether the connected audio player supports
AVRCP (Audio Video Remote Control Profile).
(Operations depend on the connected audio player.)
• Disconnect and connect the Bluetooth player again.
You may have tried to copy the same entries (as stored)
to the unit. Press number button 3 to exit.
Continued on the next page
REFERENCES 41