JVC KD-ABT22 Instructions Manual page 187

When a call comes in....
The source is automatically changed to "Bluetooth."
• Phone number appears (if acquired).
When "Auto Answer" is activated....
The unit answers the incoming calls automatically, see
page 33.
• When "Auto Answer" is deactivated, press any
button (except
incoming call.
• You can adjust the microphone volume level (see
page 33).
To end the call or reject an incoming call
Hold any button (except
• When "Auto Answer" is set to "Reject," the unit
rejects any incoming calls.
Answering a waiting call
If your cellular phone is equipped with the call waiting
function, you can put the current call on hold and
answer the waiting call.
Press any button (except
• To restore the on-hold call, press any button (except
/control dial) again.
• When you end one call, you can connect to the other.
When a SMS comes in....
If the cellular phone is compatible with SMS (Short
Message Service) and "MSG Notice" is set to "On"
(see page 33), the unit rings and "Received Message"
appears on the display to inform you of the message
arrival.
• You cannot edit or send a message through the unit.
/control dial) to answer the
/control dial).
/control dial).
How to enter phone number
How to delete phone number
1
2
Select "Call."
3
Display the list of phone numbers using one
of the dialing method (see step 3 of "Making
a call" on page 18).
4
Select the name/phone number you want to
delete.
5
Delete the selection.
• Press number button 6 (
the listed numbers in step
OPERATIONS
Select a number.
Move the entry position.
Confirm the entry.
) to delete all
3
.
Continued on the next page
19