Configuring The Dvr With A Crossover Cable - Nuvico NVJV-4000 Instruction Manual

4. CONFIGURING THE DVR WITH A CROSSOVER CABLE

Assuming that the DVR maintains the factory default Network settings (192.168.0.85),
this section will explain how to configure the computer to connect directly to the DVR.
The following illustration was based on a computer system running Windows XP
Professional.
On the PC, click on Start,
Settings, then Control Panel
to open the Control Panel.
Double-Click on Network
Connections to open the
network settings window.
73
JV SERIES DVR