Configuring The Dvr With A Crossover Cable - Nuvico AP-C1600 User Manual

CONFIGURING THE DVR WITH A CROSSOVER CABLE

This section will explain how to configure the computer to connect directly to the DVR. The following
illustration was based on a computer system running Windows XP Professional.
Revision 6.0
On the PC, click on Start, Settings, then
Control Panel to open the Control Panel.
Double-Click on 'Network Connections' to
open the network settings window.
Right-Click on the 'Local Area Connection'
icon to drop a pull-down menu, then click on
Properties to enter the Local Area
Connection Properties.
50
APEX SERIES DVR