Service Port; E-Mail - Nuvico NVJV-4000 Instruction Manual

Jv series
Table of Contents

Advertisement

5. SERVICE PORT

The DVR's connection port can be adjusted in case the default port 80 is blocked.
Often, the Internet service providers block the default web broadcasting port 80,
therefore disabling any type of web server services being run from commercial or
residential internet services. If that is the circumstances, then the DVR's service port
may be modified to allow the connection from the remote client program.

6. E-MAIL

Select Service Port, then use the numerical
buttons to enter an alternate port. In most cases,
any port ranges above 1000 are not used and are
not blocked. Configure the service port to any
number of one's preference. Default port is 7000.
The DVR sends notifications to one designated e-
mail address when the following events occur:
• Alarm Detection
• Video Signal Loss
• Power Failure
• Hard Disk Drive Failure
76
JV SERIES DVR

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nvjv-8000

Table of Contents