Configuring The Dvr With A Crossover Cable - Nuvico NVDV3-4000 Instruction Manual

7.6 CONFIGURING THE DVR WITH A CROSSOVER CABLE

Assuming that the DVR maintains the factory default Network settings (192.168.0.60), this section will
explain how to configure the computer to connect directly to the DVR. The following illustration was
based on a computer system running Windows XP Professional.
On the PC, click on Start, Settings,
then Control Panel to open the
Control Panel.
Double-Click on Network
Connections to open the network
settings window.
70
DV 3 SERIES DVR