Limiting The Camera Position - Nuvico NVJV-4000 Instruction Manual

b) Tour allows the PTZ camera to follow preset paths in an automated fashion.
Repeat as many times as necessary.

6. LIMITING THE CAMERA POSITION

After moving the PTZ camera to the
desired position, move the highlighter to preset.
The number will start flashing.
Using the numeric button, select the desired
preset number, then press Enter button to
confirm the selection.
Move the highlighter to GOTO, the number will
start flashing.
Using the numeric button, put a preset number to
move the PTZ camera to the preset positions.
Once all PTZ camera positions have been
confirmed, move the highlighter to tour and then
configure the programmed preset number
followed by the Enter button. Press the
cancel/OSD off button to stop the automatic PTZ
camera tour.
Limiting the camera poison may not be supported.
Func1 and Func2 may not be supported.
36
JV SERIES DVR