Cochlear Wireless phone clip Quick Manual page 4

Cochlear Wireless Phone Clip
™
Quick guide for Baha
Pairing with your Baha 4 Sound Processor
A
Switch off your Baha 4 Sound Processor:
By opening the
battery door and
removing the battery.
B
Switch on your Phone Clip and remove
the silver cap.
Switch on
Remove cap
E While pairing mode is active, switch on your sound processor:
By inserting the
battery and closing
the battery door.
F Successful pairing will be indicated by an audible melody
played in the sound processor.
users
®
OR
C Press the white pairing button on the
Phone Clip once using the tip of a pen
or similar object.
OR
By pressing the
"off/volume down"
button.
D The LED will flash yellow every two
seconds and the Phone Clip will now
be in pairing mode for 20 seconds.
By pressing the
"on/volume up" button.