Product Overview; Getting Started - Cochlear Wireless phone clip Quick Manual

Cochlear Wireless Phone Clip
™
Quick guide for Baha
Benefits of your Cochlear Wireless Phone Clip
Enjoy hands-free calling direct to your Baha 4 Sound Processor.
Hear your Bluetooth-enabled navigation system directly in your
Baha 4 Sound Processor.
Discreetly adjust your Baha 4 Sound Processor by using the
Phone Clip as a remote control.
Stream music from a Bluetooth-enabled device.
The Phone Clip can be easily attached to clothing. The built-in
microphone will pick up and transmit your voice, even if your phone
is several metres away.

Product overview

Microphone
inlet
ON/OFF
switch
OFF
ON
Sound processor
program button
®

Getting Started

Check with your hearing healthcare professional whether your sound processor has been
paired with your Phone Clip. Pre-paired sound processors do not need to be paired again.
Call pick-up/
If your sound processor is not pre-paired, instructions on how to easily pair it with your
hang-up button
Phone Clip are on the last page of this guide.
Tip! Make sure that your sound processor volume is comfortably adjusted before you change
the settings with the volume control on the Phone Clip.
Volume
control
Sound processor
Charging the battery
microphone
mute button
Plug one end of the included micro-USB charging cable into the Phone Clip and the other
into a computer, or into a power outlet via the supplied adapter.
When the red LED indicator on top of the Phone Clip turns green with a red blink every 2
seconds charging is complete.
The first time you charge your Phone Clip allow it to charge for at least 3 hours, even if the
indicator light shows a full charge. The battery cannot be overcharged.
Micro-USB connector
Note: The Phone Clip provides 6 hours of talk time or 80 hours of standby time from a full
for charging
charge.
users
10-30cm between mouth
and Phone Clip