Cochlear Wireless Phone Clip Quick Manual

Quick guide for Baha® sound processor users
Cochlear™ Wireless Phone Clip
Benefits of your Cochlear Wireless Phone Clip
Enjoy hands-free calling direct to your Baha sound processor.
Hear your Bluetooth®-enabled navigation system directly in
your Baha sound processor.
Discreetly adjust your Baha sound processor by using the
Phone Clip as a remote control.
Stream music from a Bluetooth®-enabled device.
The Phone Clip can be easily attached to clothing. The built-in
microphone will pick up and transmit your voice, even if your
phone is several metres away.

Product overview

Microphone
inlet
ON/OFF
switch
OFF
ON
Sound processor
program button

Get started

Check with your hearing healthcare professional whether
your sound processor has been paired with your Phone Clip.
Previously paired sound processors do not need to be paired
Call pick-up/
again. If your sound processor is not pre-paired, see below for
hang-up button
instructions on how to easily pair it with your Phone Clip.
Volume
control
Tip! Make sure that your sound processor volume is comfortably
Sound processor
adjusted before you change the settings with the volume control on
microphone
the Phone Clip.
mute button
Charging the battery
Plug one end of the included micro-USB charging cable into the
Phone Clip and the other into a computer, or into a power outlet
Micro-USB connector
via the supplied adapter.
for charging
When the red LED indicator on top of the Phone Clip turns green
with a red blink every 2 seconds charging is complete.
The first time you charge your Phone Clip allow it to charge for at
least 3 hours, even if the indicator light shows a full charge. The
battery cannot be overcharged.
Note: The Phone Clip provides 6 hours of talk time or 80 hours of
standby time from a full charge.
10-30cm between mouth
and Phone Clip