Light Indicators (Led) - Cochlear Wireless phone clip Quick Manual

Cochlear Wireless Phone Clip
™
Quick guide for Baha

Light indicators (LED)

The LED indicator at the top of your Phone Clip functions as a
multi-purpose user interface, providing information on the status
of the device.
Blinks Meaning
Normal operation (green)
Battery low (yellow)
Charging (red)
Fully charged – still connected to charger (red/green)
Ready for pairing with sound processor (yellow)
Ready for pairing with Bluetooth device (blue)
Bluetooth call active (blue)
Using the Phone Clip
Managing calls with the call pick-up / hang-up button
Support
For full details about the Cochlear Wireless Phone Clip, please refer to the User Manual.
For full details about the Cochlear Baha 4 Sound Processor, please refer to the User Manual part A.
For further support and videos, visit the Cochlear website: www.cochlear.com
Incoming calls:
To answer a call, press once.
To decline a call, double-click.
During a call:
To transfer a call started on your phone to the
phone clip, press once.
To put a call on hold, press and hold for 2
seconds.
To make a call:
To redial the last number, double-click.
To activate voice dialling, press and hold for 2
seconds.
users
®
Connecting with your mobile phone
To receive or place phone calls with the Phone Clip, the Bluetooth
functionality must be activated in your mobile phone. Your phone
might ask you to confirm whether you would like to connect with the
Phone Clip after it is successfully paired.
If you have to connect manually, locate a list of "Paired Devices" in
your phone's Bluetooth
Phone" and select "Connect."
You are now ready to use your Phone Clip.
On some phones you can also enable "Automatic Reconnection."
Refer to your mobile phone's user guide for instructions on how to
do this.
Tip! In most instances, a headset symbol on the main screen of your
mobile phone will confirm that you have successfully connected.
Using the Phone Clip as a remote control
When you're not on the phone, the Phone Clip can also be used as a simple
remote control for your sound processor(s).
Adjust the sound
processor's volume
menu. From this list, highlight "Hearing Aid
®
Press once to mute
and unmute the sound
processor's microphones.
Press one or more times to
toggle through the sound
processor's programs
®