Setting Sms Centre; Sms To A Pabx; Activating/Deactivating The Sms Function - Siemens Gigaset C455 User Manual

Replying to or forwarding text messages
You are reading an SMS (page 18).
Press the display key.
§Menu§
You have the following options:
Reply
Write and send a reply SMS directly
(page 17).
Use text
Edit the text in the SMS and then send it
(page 17).
Send
Forward the text of an SMS to another recip-
ient (page 17).
Adding a number to the directory
Adding the sender's number
You are reading an SMS in the incoming mes-
sage list.
Press the display key.
§Menu§
Continue see page 14.
Note:
You can create a special directory for text messages
within your main directory by putting a star (*) before
the names.
An appended mailbox ID will be copied to the direc-
tory.

Setting SMS centre:

Entering/changing SMS centres
¤
You should find out about the services and
special functions offered by your service
provider before you make a new applica-
tion and before you delete preconfigured
phone numbers.
¢ ¢
SMS Settings
§Menu§
q
SMS centre (e.g. select
Centre 1) and press
You have the following options:
Active Send Serv. Centre
If the SMS messages are to be sent through
this SMS centre, press
‰
SMS centre ( = on). If a different SMS cen-
tre was active previously, then this will be
deactivated. For the SMS centres 2 and 3,
the setting only applies to the next SMS.
SMS Centre No.
Enter the number of the SMS centre and
press .
§OK§
¢
Service Centres
Service
.
§OK§
to activate the
§OK§
Sending an SMS through another SMS
centre
¤
Activate the SMS centre (2 or 3) as the active
send service centre (page 19).
¤
Send the SMS.
This setting only applies to the SMS that is
being sent next. Afterwards the setting auto-
matically reverts to Service Centre

SMS to a PABX

u
You can only receive an SMS when the Call-
ing Line Identification (page 10) is for-
warded to the extension of the PABX (CLIP).
The CLIP of the phone number for the SMS
centre is evaluated in your Gigaset.
u
Depending on your PABX, you may have to
add the access code (external line prefix)
before the number of the SMS centre.
If in doubt, test your PABX e.g. by sending an
SMS to your own phone number, once with
and once without the access code.
u
When you send SMS messages, your sender
number may be sent without your extension
number. In this case the recipient cannot
reply to you directly.
Sending and receiving SMS on ISDN PABXs is
only possible via the MSN number assigned to
your base station.
Activating/deactivating the SMS
function
When you switch off you cannot send or receive
any SMS with your phone.
Settings which you have made for sending and
receiving text messages (the numbers of SMS
centres) and any entries in the incoming mes-
sage and draft message lists will be retained
even after the function is deactivated.
4 I O 2 L
§Menu§
~ Q
Deactivate the SMS function.
§OK§
Or:
~ 1
Activate the SMS function (default
§OK§
settings).
SMS (text messages)
1.
19