Sms On A Pabx; Activating/Deactivating Sms Function - Siemens Gigaset S810A User Manual

SMS (text messages)
¤
You can enter data in the following fields:
Active Send:
§Yes§
Select if SMS messages are to be sent
via the SMS centre.
SMS Service Centre no.:
Enter the number of the SMS service and
insert a star if your service provider sup-
ports personal mailboxes.
Number of e-mail access:
Enter the number of the e-mail service.
§Save§
Press the display key.
Please note
Ask your service provider for details on
entering service numbers if you wish to
use personal mailboxes (prerequisite:
your service provider supports this func-
tion).
Sending an SMS via another SMS
centre
¤
Activate the SMS centre (2 to 4) as the
active send service centre.
¤
Send the SMS.
50

SMS on a PABX

u
You can only receive an SMS when the
Calling Line Identification is forwarded
to the extension of the PABX (CLIP). The
CLIP evaluation of the SMS centre
number is completed in your Gigaset.
u
Depending on your PABX, you may have
to add the access code (external line pre-
fix) before the number of the SMS centre.
If in doubt, test your PABX, e.g., by send-
ing an SMS to your own number: once
with and once without the access code.
u
When you send SMS messages, your
sender number may be sent without your
extension number. In this case, the recip-
ient cannot reply to you directly.
Sending and receiving SMS messages on
ISDN PABXs is only possible via the MSN
number assigned to your base.
Activating/deactivating
SMS function
If you deactivate the SMS function, you can-
not send or receive any SMS messages with
your phone.
The settings you have made for sending and
receiving SMS messages (e.g., the numbers
of the SMS centres) and the entries in the
incoming and draft message lists are saved
even after deactivation.
v
Open the main menu.
*#Q5# 2 L
Enter the digits.
Q
§OK§
Deactivate the SMS function.
or:
§OK§
Activate the SMS function
(default setting).