Sms On A Pabx; Activating/Deactivating First Ringtone Muting; Activating/Deactivating Sms Function - Siemens GIGASET C595 Manual

SMS (text messages)

SMS on a PABX

u
You can only receive an SMS when
the Calling Line Identification is for-
warded to the extension of the PABX
(CLIP). The CLIP evaluation of the SMS
centre number is completed in your
Gigaset.
u
Depending on your PABX, you may
have to add the access code (external
line prefix) before the number of the
SMS centre.
If in doubt, test your PABX, e.g. by
sending an SMS to your own number:
once with and once without the access
code.
u
When you send SMS messages, your
sender number may be sent without
your extension number. In this case the
recipient cannot reply to you directly.
Sending and receiving SMS messages on
ISDN PABXs is only possible via the MSN
number assigned to your base.
46
Activating/deactivating first
ringtone muting
v
Open the main menu.
*#Q5# O
Press keys.
Q
Make the first ring audible.
§OK§
Or:
Mute the first ring.
§OK§
Activating/deactivating SMS
function
If you deactivate the SMS function, you
cannot send or receive any SMS messages
with your phone.
The settings you have selected for sending
and receiving SMS messages (e.g. the
numbers of the SMS centres) and the
entries in the incoming and draft SMS lists
are saved even after you turn off your
phone.
v
Open the main menu.
*#Q5# 2 L
Enter the digits.
Q
Deactivate the SMS function.
§OK§
Or:
Activate the SMS function
§OK§
(default setting).